With the improvement of people's quality of life, customized furniture is becoming more and more popular. People for the function of the furniture is not only limited to the beauty of their own, more important is the quality and practicality. For example, when the cabinet closes, I hope there can be a buffer space, such as, whether you can not install a separate handle to keep the entire home clean and beautiful. For these features to facilitate the habits of life, you must rely on furniture hardware to achieve. The buffer function uses a kind of buffer chain, the rebound function is required to install a special push to open, how to install these functional accessories is also a very important issue. So we next mainly talk about how to correctly install the open latch.

There are usually two types of cabinets that have magnetic touch latch, covered and recessed cabinet doors respectively. However, since the floor or side panels are different areas, the location for the push latch is different. The first step is to determine the amount of rebound, the length of the head and the dimensions of the entire length to the head base and length of the magnetic head. The mounting position of the base is measured against the head length of the magnetic head. Covered cabinet door to install the space of the door plate, the side plate and the base plate to keep 0.5mm between the cabinet door push to open latch to ensure the smoothness of the process of use. Inlaid cabinet need to ensure that the installation position, the closed state of the door panel is parallel to the side panel or bottom panel will not protrude or collapse.

When the size and installation position is determined with a pencil marking number. Then mark the position according to the installation of the rebound strength then install the matching base, the body of the counter is selected according to the size of the rail, it is the basis of the push to open door latch device. When the above two steps are installed we have to test and press with a finger whether the rebound function is available to ensure that the size of the protruding part is accurate. In the last step to test the door to open and close, if repeated many times everything is normal, so that the installation is completed.

The installation is over. It's simple but one thing is important: accuracy of size and position. It varies due to the size of the cabinet door push latch device, so you need to confirm the size for example like the cabinet push latch device, if there is an explanation follow the instructions directly. If there is no explanation you can install it as described above. Of course, when you choose the cabinet hardware, do not think that just the right price can be, it is best to choose trustworthy manufacturers, so that the impact on the future of daily life will be minimized, but also effectively guarantee the after-sales service.